R Link 2 Firmware Download
SKU Creator - Create your custom map package on R-LINK 2
Presentation
SKU Creator is a tool that allows you to easily and quickly create your custom map package from iGO files (maps, poi, buildings, etc.) for R-LINK 2.
It makes your working directory 'content' compliant and creates a SKU archive ready to install in IGO format.
This tool can also read R-LINK 2 fingerprint in order to view and/or delete its contents.
All this can be useful to update maps more recent than those offered by Renault, lighten the content of its R-LINK 2 or for those who can no longer download the latest maps on R-LINK 2 Toolbox.
Screenshots
Prerequisites
To be able to install your own content, it's mandatory to patch the iGO partition of your R-LINK 2 in order to unlock it.
This operation is low risk and completely reversible if you follow the instructions below and don't use a poor quality USB stick.
- From your R-LINK 2, retrieve your software release by going to Menu => System Information => Next page (page 2) => Software release
- Download below the version corresponding to your software release :
Info: Like any official update of the R-LINK 2, installing one of these partitions will delete your address book and navigation history.2.2.19.30x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
3.3.16.96x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
3.3.16.98x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
7.0.24.13x or 16x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
8.0.32.50x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
9.0.33.43x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
9.0.34.61x :- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
]
- Extract the R-LINK folder from the downloaded archive, and place it at the root of your USB stick.
- In your car (engine running), plug in the USB stick and after a few seconds, press Yes when the message asks you to install a software update.
After the update, the R-LINK 2 will restart and remain on a black screen for 1 to 2 minutes. Don't panic, this is completely normal and wait for the R-LINK 2 interface to reappear.
- It's possible that the software update will be asked again, of course press No and then disconnect the USB stick.
- Congratulations, your R-LINK 2 is now unlocked and ready to install iGO files of your choice.
Note: If you update your R-LINK 2 to a new version, you will return to the original iGO partition. So you will have to repeat the operation by selecting the corresponding version.
Make sure that the version is present before updating your R-LINK 2 or you will no longer be able to use your custom maps.
Back to the original iGO partition
If for any reason, you want to restore the original iGO partition. Download below the version corresponding to your software release and follow the instructions above.
2.2.19.30x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
3.3.16.96x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
3.3.16.98x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
7.0.24.13x or 16x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
8.0.32.50x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
9.0.33.43x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
9.0.34.61x :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
You will then have to reinstall an official Renault map (only if you have installed a custom one) by downloading it from the official Renault tool: R-LINK2 Toolbox.
Download
SKU-Creator-0.5.2_x86.zip (2,1 MB) | 32-bit | v0.5.2
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
SKU-Creator-0.5.2_x64.zip (2,4 MB) | 64-bit | v0.5.2
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
Changelog
v0.5.2 (27/12/2020)
- Distinction of specific maps (Extra, Disputed, etc...)
- Improved phoneme detection (TTS and ASR)
- Faster automatic detection of fingerprints on USB flash drives
- Ability to delete a memorised VIN
- Detection and warning when square brackets are used in a path
- Warning message in case of insufficient space before generating the SKUs
- Adding Portuguese language
History of previous changes
v0.5.1 (24/03/2020)
- Adding a clickage logo to download the patched iGO partition corresponding to your version under 'Information R-LINK 2'
- Adding a detection for Renault WorldWide POI
- Adding a clickable logo for quick access to the exclusion folder (when you have one)
- Exclusion of .fda and *_Truck.poi file formats when using "Check and fix mistakes in structure of the 'content' folder"
- Fixed a bug where in very rare cases the navigation information was not displayed correctly
- Adding German, Russian and Turkish languages
v0.5 (18/12/2019)
- Adding a feature to check and fix mistakes in structure of the 'content' folder (BETA)
- Adding an option to automatically rename iGO files to R-LINK 2 format (BETA)
- Adding a warning message when adding a global_cfg.zip + prohibition to do STM 'delete' on global_cfg.zip
- Adding an option to choose a specific path for SKU creation
- Adding a 'Refresh' icon for "Processing by targeted files"
- Adding a clickable R-LINK 2 logo (under R-LINK 2 Information) redirecting to the official Renault page of the latest R-LINK 2 firmware in relation to the VIN entered.
- Adding a clickable iGO logo redirecting to the iGO maps download page
- Removing "Generate STM 'delete' for all files" feature
- Fixed a random display problem when starting the tool
- Adding Dutch, Slovenian, Bulgarian, Czech, Romanian and Polish languages
v0.4.2 (20/10/2019)
- Adding a column displaying the editor (TomTom, Here, NNG, etc.) of each file for R-LINK2 Fingerprint
- Fixed a bad positioning of some buttons on Windows 7 and lower
- Fixed a detection problem for small fingerprints
- Fixed a problem with refreshing the project size when a file is deleted with the tool
- Improvement of some texts and adjustment of some columns
- Changed encoding of translation files from ANSI to UTF-16.
- Adding Italian language
v0.4.1 (12/10/2019)
- Possibility to export the content of the R-LINK 2 to XML or CSV.
- Adding Slovak language
v0.4 (03/10/2019)
- Adding a R-LINK 2 fingerprint decryption module to view and delete the content of your choice
- Automatic R-LINK 2 fingerprint detection from a USB stick
- Possibility to save one or more VINs to speed up the decryption of the fingerprint the next time it's used.
- Automatic saving and display of the SKU archive names of your various projects.
v0.3-fix (19/09/2019)
- Fixed a binary problem in x86 version (32-bit) only
v0.3 (12/09/2019)
- Reworked interface
- Possibility to generate STM 'copy' et 'delete' on targeted files
- Adding a drop-down list "My projects" to quickly retrieve the last used directories
v0.2 (05/09/2019)
- Adding Spanish language
- Adding a 32-bit version
- Fixed a buggy variable that prevented the display of the path under certain conditions
v0.1 (04/09/2019)
- Initial version
Tutorial - How to create your custom content for your R-LINK 2 with SKU Creator
Step 1: Preparation of the 'content' folder
Step 1: Preparation of the 'content' folder
The use of SKU Creator requires first of all to have a 'content' folder respecting a strict tree structure including IGO content files (buildings, maps, poi, speedcam, etc.).
To retrieve the iGO files of your choice, you can go here: https://www.navitotal.com/maps-buildings-dem-poi/
Overview of the tree structure and iGO files supported by R-LINK 2.
- content
--- building
----- (*.3dc, *.3dl)
--- global_cfg
----- (global_cfg.zip)
--- map
----- (*.fpa, *.fbl, *.fsp, *.hnr)
--- phoneme
----- (*_vr.ph, *-Nuance.ph)
--- poi
----- (*.poi, *_BaseExtended.poi, *_FuelType.poi)
--- speedcam
----- (*.spc or *.txt)
--- car
----- (*.zip)
--- dem
----- (*.dem)
--- tmc
----- (*.tmc)
Please follow these rules for the preparation of the 'content' folder
- Never put an iGO configuration file (global_cfg.zip) from an unreliable source or modified by a third party (there is no guarantee that it will work on R-LINK 2).
Otherwise, navigation could become unstable or even unusable.
Always use the latest official NNG version or, in case of doubt, keep the one of your R-LINK 2. - Do not put any other file format not listed in the overview above. If you do, you will get errors during installation (unable to install, license problem, etc.)
- A country cannot have more than one type of iGO file (except POI).
- For speed cameras, please use only one .spc file or .txt files per country but not both at the same time.
- Do not leave any files that are not iGO files.
- You must rename your iGO files with the same name as the R-LINK 2 uses.
R-LINK 2 countries names
Afghanistan
Aland_Islands
Albania
Algeria
American_Samoa
Andorra
Angola
Anguilla
Antarctica
Antigua_and_Barbuda
Argentina
Argentina_Buenos_Aires
Argentina_Catamarca
Argentina_Chaco
Argentina_Chubut
Argentina_Ciudad_Autonoma_de_Buenos_Aires
Argentina_Cordoba
Argentina_Corrientes
Argentina_Entre_Rios
Argentina_Formosa
Argentina_Isla_Martin_Garcia
Argentina_Jujuy
Argentina_La_Pampa
Argentina_La_Rioja
Argentina_Mendoza
Argentina_Misiones
Argentina_Neuquen
Argentina_Rio_Negro
Argentina_Salta
Argentina_San_Juan
Argentina_San_Luis
Argentina_Santa_Cruz
Argentina_Santa_Fe
Argentina_Santiago_del_Estero
Argentina_Tierra_del_Fuego
Argentina_Tucuman
Armenia
Aruba
Australia
Australia_Capital_Territory
Australia_New_South_Wales
Australia_Northern_Territory
Australia_Queensland
Australia_South
Australia_Tasmania
Australia_Victoria
Australia_West
Austria
Azerbaijan
Bahamas
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia
BosniaHrz
Botswana
Bouvet_Island
Brazil
British_Indian_Ocean_Territory
British_Virgin_Islands
Brunei_Darussalam
Bulgaria
Burkina_Faso
Burundi
Cambodia
Cameroon
Canada
Canada_Alberta
Canada_British_Columbia
Canada_Manitoba
Canada_New_Brunswick
Canada_Newfoundland_and_Labrador
Canada_Northwest_Territories
Canada_Nova_Scotia
Canada_Nunavut_Territory
Canada_Ontario
Canada_Prince_Edward_Island
Canada_Quebec
Canada_Saskatchewan
Canada_Yukon_Territory
Cape_Verde
Caribbean_Netherlands
Cayman_Islands
Central_African_Republic
Chad
Chile
China
China_Anhui
China_Beijing
China_Chongqing
China_Fujian
China_Gansu
China_Guangdong
China_Guangxi
China_Guizhou
China_Hainan
China_Hebei
China_Heilongjiang
China_Henan
China_Hong_Kong
China_Hubei
China_Hunan
China_Inner_Mongolia
China_Jiangsu
China_Jiangxi
China_Jilin
China_Liaoning
China_Macao
China_Ningxia
China_Qinghai
China_Shaanxi
China_Shandong
China_Shanghai
China_Shanxi
China_Sichuan
China_Taiwan
China_Tianjin
China_Tibet
China_Xingjiang
China_Yunnan
China_Zhejiang
Chinese_Taipei
Christmas_Island
Cocos_Islands
Colombia
Comoros
Congo
Cook_Islands
Costa_Rica
Croatia
Cuba
Curacao
Cyprus
CzechRep
Denmark
Djibouti
Dominica
Dominican_Republic
East_Timor
Ecuador
Egypt
El_Salvador
Equatorial_Guinea
Eritrea
Estonia
Ethiopia
Falkland_Islands
Faroe_Islands
Fiji
Finland
France
French_Polynesia
French_Southern_Territories
FrenchGuiana
FYROM
Gabon
Gambia
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guernsey
Guinea
Guinea_Bissau
Guyana
Haiti
Heard_Island_and_McDonald_Islands
Honduras
Hong_Kong
Hungary
Iceland
India
Indonesia
Iran
Iraq
Ireland
Isle_of_Man
Israel
Italy
Ivory_Coast
Jamaica
Japan
Jersey
Jordan
Kazakhstan
Kenya
Kiribati
Kosovo
Kuwait
Kyrgyzstan
Laos
Latvia
Lebanon
Lesotho
Liberia
Libya
Liechtenstein
Lithuania
Luxembourg
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall_Islands
Martinique
Mauritania
Mauritius
Mayotte
Mexico
Micronesia
Moldova
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
Netherlands_Antilles
New_Caledonia
New_Zealand
New_Zealand_North_Island
New_Zealand_South_Island
Nicaragua
Niger
Nigeria
Niue
Norfolk_Island
North_Korea
Northern_Mariana_Islands
Norway
Oman
Pakistan
Palau
Palestine
Palestinian_Territory
Panama
Papua
Papua_New_Guinea
Paraguay
Peru
Philippines
Pitcairn_Islands
Poland
Portugal
Qatar
Republic_of_Congo
Reunion
Romania
Russia
Rwanda
Saint_Helena,_Ascension_and_Tristan_da_Cunha
Saint_Kitts_and_Nevis
Saint_Lucia
Saint_Vincent_and_the_Grenadines
SaintBarthelemy
SaintMartin
SaintPierreandMiquelon
Samoa
SanMarino
Sao_Tome_and_Principe
Saudi_Arabia
Senegal
Serbia
Serbia_and_Montenegro
Seychelles
Sierra_Leone
Singapore
SintMaarten
Slovakia
Slovenia
Solomon_Islands
Somalia
South_Africa
South_Korea
Spain
Sri_Lanka
Sudan
Suriname
Svalbard_and_Jan_Mayen
Swaziland
Sweden
Switzerland
Syria
Taiwan
Tajikistan
Tanzania
Thailand
Togo
Tokelau
Tonga
Trinidad_and_Tobago
Tunisia
Turkey
Turkmenistan
Turks_and_Caicos_Islands
Tuvalu
Uganda
Ukraine
United_Arab_Emirates
United_States_Minor_Outlying_Islands
UnitedKingdom
Uruguay
US_Virgin_Islands
USA
USA_Alabama
USA_Alaska
USA_Arizona
USA_Arkansas
USA_California
USA_Colorado
USA_Connecticut
USA_Delaware
USA_District_of_Columbia
USA_Florida
USA_Georgia
USA_Guam
USA_Hawaii
USA_Idaho
USA_Illinois
USA_Indiana
USA_Iowa
USA_Kansas
USA_Kentucky
USA_Louisiana
USA_Maine
USA_Maryland
USA_Massachusetts
USA_Michigan
USA_Minnesota
USA_Mississippi
USA_Missouri
USA_Montana
USA_Nebraska
USA_Nevada
USA_New_Hampshire
USA_New_Jersey
USA_New_Mexico
USA_New_York
USA_North_Carolina
USA_North_Dakota
USA_Ohio
USA_Oklahoma
USA_Oregon
USA_Pennsylvania
USA_Puerto_Rico
USA_Rhode_Island
USA_South_Carolina
USA_South_Dakota
USA_Tennessee
USA_Territorial_Waters
USA_Texas
USA_US_Midwest_Region
USA_US_Northeast_Region
USA_US_Southern_Region
USA_US_Western_Region
USA_Utah
USA_Vermont
USA_Virgin_Islands
USA_Virginia
USA_Washington
USA_West_Virginia
USA_Wisconsin
USA_Wyoming
Uzbekistan
Vanuatu
Vatican
Venezuela
Vietnam
Wallis_and_Futuna
Western_Sahara
Yemen
Zambia
ZimbabweNote : If you see an original country name on your R-LINK 2 that is different from the list, please contact me in PM to make a correction.
Continents and subcontinents
Eastern_Europe
Europe
Middle_East
North_America
South_America
SouthEast_Asia
Southern_Africa
Western_Europe
Example:
If you download a poi file named United_Kingdom_TomTom_2019.06_190704.poi , you will need to rename it to UnitedKingdom.poi and place it in the poi folder.Important! If there is a difference with a file name, you may add duplicate content, use more resources for loading and occupy disk space for nothing.
Be very careful on this point, the key to a well-prepared package is at stake here.
Since version 0.5, SKU Creator includes a feature to check and fix mistakes in 'content' folder tree.
An option to automatically rename files to R-LINK 2 format is also available.
Note that these features, however practical they may be, still remain in the state of BETA!
Here is the procedure:
- Create a 'content' folder in the location of your choice.
- Paste your iGO files (in bulk) into this folder.
- Run SKU-Creator.exe. (No installation is required)
- Click on the Browse... button then select 'content' folder previously created and click on 'OK'.
Note: All projects opened under SKU Creator will be saved and displayed in the "My Projects" drop-down list, this will allow a faster opening for future times.
- Under Global processing of the 'content' folder, click on Check and fix mistakes in folder tree structure.
Leave Automatically rename files to R-LINK 2 format checked if you also want the tool to rename the files for you.
Note: .tmc, .dem, .zip (3D Car) and .txt (Speed Cameras) files are not renamed.
This action may take some time in the case of a large project.A pop-up message will confirm the proper execution of the task by specifying what has been done on your folder.
If you see a message informing you that files have been moved to the exclusion folder, this may be for the following reasons:
- iGO file not supported by R-LINK 2 (.ftr, etc)
- Duplicate iGO file
- File not in iGO format
'Exclusion' folder is accessible in the parent directory of the 'content' folder.
Since version 0.5.1, a clickable logo is displayed for direct access.
All files inside will be deleted each time the feature is used again.
Take a look at it to see what was excluded before everything was deleted.
Step 2: Generating STM, MD5 and update_checksum files with SKU Creator
For each iGO file in your tree structure, a checksum file (.md5) and an action file (.stm) must be associated with it.
The STM action file has 2 possible options: 'copy' ou 'delete'.
The 'copy' option allows you to copy/replace a file on the R-LINK 2. 95% of the time, you will use this option.
The 'delete' option allows you to delete a file on the R-LINK 2, in which case only the .stm file is required.
In addition to this, another checksum file named update_checksum.md5 will have to be created this time for the entire project, the latter will be in an update_checksum folder located in the same place as the 'content' folder.
Now that you know the structure to follow, we return to SKU Creator.
- Under Global processing of the 'content' folder, click on Generate STM 'copy' for all files.
A pop-up message will confirm that the task has been successfully completed.
- Still under Global processing of the 'content' folder, click on Generate MD5 and update_checksum for all files.
This action may take some time in the case of a large project.
A pop-up message will confirm that the task has been successfully completed.
Note: It's possible at any time to stop the generation process by clicking on the Stop processing button.
- Your 'content' and 'update_checksum' folders are now ready to be compiled.
Important! From this moment on, it's imperative not to add, modify or delete any file from your project otherwise there will be an error during installation on the R-LINK 2.
Step 3: Compiling the project in SKU format with SKU Creator
The compilation is strict and must respect several rules:
- The generated SKU archive must be in the specific IGO format
- Each SKU archive should never exceed 2 GB
- Each SKU archive created must be associated with a checksum file (.md5)
You can see the size of your project as well as the number of SKUs required under 'Information'.
Come on, let's go back!
- Under SKU Compilation, in the dedicated field, enter the name to give to your SKU archive (without the extension .sku)
If your project requires several SKU archives, each of them will automatically be created and renamed with the title Part 1,2,3.. at the end of the name.
- You can choose some options to include with the compilation:
- Include universal license: this option adds a specific license that accepts any type of IGO content.
It's essential in the case of any addition or deletion!
- Include force_update.txt (V7 and +): this option adds an empty file named 'force_update.txt' to force the installation for R-LINK 2 in version 7 or higher. You can leave this option checked even if you are in version 2 or 3, this will have no impact.
- Generate 'R-LINK' folder: this option creates an R-LINK folder in which all SKU archives will be generated. Then simply copy the R-LINK folder to the root of your USB stick and it can be installed directly on the R-LINK 2.
- Then click on 'Create SKU archive' or 'Create x SKU archives' (depending on the size of your project) to start the creation process.
A progress bar will appear at the bottom right to show you where the process steps are at.
Note: It's possible at any time to stop the generation process by clicking on the Stop processing button.
- At the end of the processing, a message will be displayed to confirm the creation of the SKU.
Press 'OK' to open the folder in which SKU were generated.
Note: Each creation is done in a SKU or SKU\R-LINK folder (depending on the option chosen) located in 'content' parent directory.
- Once the files have been generated, all that remains is to copy the parent folder R-LINK to the root of your USB stick and insert it into your R-LINK 2.
Important! If you compile the same project several times, all the contents of the SKU or SKU\R-LINK folders will be automatically deleted with each new processing.
So you will have to make sure that you have not left any important files in these folders!
Video tutorial - How to create your custom map package for your R-LINK 2 with SKU Creator
This video tutorial presents a summary of the 3 steps mentioned above :
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
Tutorial - View and delete the content of your choice from a R-LINK 2 fingerprint
- In SKU Creator, click on the tab 'R-LINK 2 Fingerprint'
- Select an R-LINK 2 fingerprint on your PC or connect a USB stick containing one.
Note: If there is a fingerprint on the USB stick, a pop-up will be displayed and the full path will be entered automatically.
- In VIN field, enter the 17 characters of your VIN (chassis number of your vehicle).
Note: If you don't know your VIN, look on the vehicle's registration document.
Tip: Leave the box 'Remember VIN' checked if you don't want to enter it the next time you use it.
- Then click on 'Decrypt fingerprint'
Information about the R-LINK 2 will be displayed under 'Information R-LINK 2'.
Under 'Content of R-LINK 2', you can see everything that your R-LINK 2 contains.
Tip: All the columns in the list can be sorted in alphabetical order, don't hesitate to adjust them to your convenience to retrieve the information you are interested in.
- To select the content to be deleted, simply click on the checkboxes to the left of each line. Once your selection is made, we move on to the compilation.
- Under 'SKU Compilation', in the dedicated field, enter the name to give to your SKU archive (without the extension .sku)
- You can choose some options to include with the compilation. For more information, see step 3, point 2.
- Select the directory in which the SKU archive will be created. By default, the directory defined is the one where the fingerprint is located.
- Then click on 'Create SKU archive' to start the creation process.
- At the end of the processing, a message will be displayed to confirm SKU creation.
Press 'OK' to open the folder where the SKU archive is created.
- Once the files have been generated, all that remains is to copy the parent folder R-LINK to the root of your USB stick and insert it into your R-LINK 2.
Frequently asked questions
Is the installation of my own map package dangerous for my R-LINK 2?
After several months of various and varied tests, the only very dangerous thing that will make navigation unusable is to delete or use an unreliable iGO configuration file (global_cfg.zip).
For the rest, adding and removing iGO content is not dangerous and a flashback is always possible by reinstalling a complete official Renault map.
It is recommended to keep an original R-LINK 2 fingerprint and to download official maps from R-LINK 2 Toolbox before starting to install custom maps.
I removed or installed a bad conf_global.zip and now the navigation of my R-LINK 2 is unusable, what can I do?
You have no choice, you will have to restore the /MAP partition of your R-LINK 2 to recover the ability to install maps.
Depending on the size of your screen, download the corresponding version below:
7″ => Not available at the moment
8.7″ =>
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
Create an R-LINK folder at the root of your key and drop the file mm2014_mapvui.lgu and the folder part0 inside it.
Make sure there are no other updates or maps in the R-LINK folder of your USB stick.
With the engine running or during a journey of at least 20 minutes, start the installation and wait until the R-LINK 2 interface returns. The update may give the impression that there is a freeze but this is not the case, wait patiently for the interface to return.
Finally, download and install the official Renault maps available from R-LINK 2 Toolbox. Navigation will reappear after the update (about 30 minutes)
Is it possible to install several SKUs from different projects?
No, it is imperative to always install one SKU project (which can contain several parts) at a time. If you install more than one SKU from different projects, you will get an error during installation.
I have installed a patched partition that doesn't match my version of R-LINK 2, what should I do?
Simply reinstall the right partition patched over the wrong one.
I will take my vehicle to the dealership to update my R-LINK 2, do I have to do anything special if I have a custom map package installed?
Yes, before going to the dealership you will have to reinstall the official Renault maps available on R-LINK 2 Toolbox. If so, a green screen will appear in the navigation area. The update will restore the original partition and no maps will be recognized, which will cause the Renault technician to ask a few questions.
I have a current subscription to Coyote or TomTom Traffic, is that a problem?
No, Coyote and TomTom Traffic will work normally after installing the custom map package. If you notice TomTom Traffic logo is not displayed, restart your R-LINK 2 by keeping the power button pressed. You can release the button when the screen turns black. Wait 1-2 minutes for the restart time.
Translation
Polyglots friends, SKU Creator has a multilingual module, you can participate in the improvement of the tool by offering a translation in a new language.
Language already translated: Bulgarian - Czech - Dutch - English - French - German - Italian - Polish - Portuguese - Romanian - Russian - Slovak - Slovenian - Spanish - Turkish
Download
- Hidden Content
- This board requires you to be registered and logged-in to view hidden content.
and select a starting language (English, Spanish, French, Italian or Slovak) to begin the translation into a new language.
To edit the translation.cfg file, please use a text editor that supports UTF-16 (Notepad ++, etc.)
Translate everything after "=" directly into the file, following a few instructions:
- The # are variables, they should not be deleted. If you have any doubts about the meaning of a sentence, contact me by PM.
- The \n are line breaks. Please do not delete them.
- Please don't replace words with a simple quote ('content,' copy',' delete',' update_checksum.md5', etc.) and don't delete the simple quotes around them.
- Don't modify the encoding of the provided file. (UTF-16)
- Do not copy and paste the entire file into a translator, the syntax of the file may be broken.
You can view the result of your translation in the application by copying the translation.lng file to the same location as SKU-Creator.exe.
When starting SKU Creator, your language will be loaded from the file and displayed by default. You are free to make your adjustments by editing the translation.lng file.
Once your translation has been completed and validated by you, send me the translation.lng file by PM.
Thank you
Informations about SKU Creator
Some antivirus doesn't like the tools compiled with AHK (AutoHotkey) and can sometimes report some false positives due to the large number of libraries included in the exe. If so, put SKU Creator in exclusion.
Acknowledgements
- djeman for iGO partitions patch, update_checksum generation and R-LINK 2 fingerprint decryption module
- SLL, weysh and Chlass for testing differents versions
- MegaNee16 for German translation and suggestions for improvement
- bovirus for Italian translation and suggestions for improvement
- elsat for Slovak and Czech translations
- schildsoft and dmenace for Dutch translation
- janch for Slovenian translation
- bobybc for Bulgarian translation
- NeeK for Romanian translation
- zaniak-x for Polish translation
- Bamsik for Russian translation
- ohayyam for Turkish translation
- joaquim.npf for Portuguese translation
Posted by: modellinnow.blogspot.com
Source: https://www.navitotal.com/nissan-renault/sku-creator-create-your-custom-map-package-link-t21463.html